|
TWE-711
|
JIS Z3313 YFW-C5ODR
AWS A5.20 E71T-1
EN758 T 42 2 P C 1 H10
|
CO2
|
TWE-711 is designed to be used with CO2
gas and it’s
available for all-position welding with
both single and multiple
pass welds on mild & 490N/mm2 high tensile
steels.
|
|
TWE-711M
|
JIS Z3313 YFW -A50DR
AWS A5.20 E71T 1M
EN758 T 42 2 P M 1 H10
|
Ar (80%)
+
CO2(20%)
|
It's available for all-position welding
with both single and
Multi-pass welds on mild and 490N/mm2 high
tensile steels
and provide good impact properties, less
fume, stable arc,
easy slag removable and excellent X-Ray
inspection.
|
|
TM-70C
|
JIS Z3313 YFW-C5ODM
|
CO2
|
TM-70C is a quasi metal-cored wire for
speed welding in flat and
horizontal fillet positions. It provides excellent pit resistance
with low spatter loss. It also performs well on zinc-primer plate
and mill scale plate at high speed fillet welding with excellent
porosity resistance.
|
|
TM-70
|
JIS Z3313 YFW-A5ODM
AWS A5.18 E70C-3M/6M
EN758 T 42 0 M M 3 H10
|
Ar (80%)
+
CO2(20%)
|
TM-70 is a metal cored wire using with Ar/CO2 for
mild steel and 490N/mm2 high
tensile steel. Its deposition rate is 10- 30% higher than a solid
wire.
|
|
TM-77
|
JIS
Z3213 YFW-A5O3M
AWS
A5.18 E70C-6M
|
Ar (80%)
+
CO2(20%)
|
TM-77 is a gas-shielded metal-cored wire
that provides
smooth spray arc, low slag volume, low
spatter, and excellent
low temperature impact toughness at -40°C.
Multi-layer
welding can be performed without removing
slag.
|
